- #Creo elements pro wildfire 5.0 selection filter how to
- #Creo elements pro wildfire 5.0 selection filter plus
- #Creo elements pro wildfire 5.0 selection filter zip
The other way around is not part of any PTC products functionalities.
PTC guarantees retro - compatibility only in being able to open older models in newer versions of Creo. Pro/ENGINEER Wildfire, Creo Elements/Pro 5.0 or Creo Parametric models cannot be opened in older versions/releases. Limitations with GCRI Note: When opening a newer version of the model in the older version of Creo a dialogbox popes up : Limitation : the feature in the models created is not editable : #Creo elements pro wildfire 5.0 selection filter how to
Best Practice How to open files created in newer release, in older version of Creo Parametric Aug 2019ĥ. The Pro/ENGINEER 2001 and Wildfire Interface Guide gives more information.1.
#Creo elements pro wildfire 5.0 selection filter zip
If solid/shell cannot be created because of open gaps (look for yellow boundaries!), menu option Feature -> Redefine -> Fix Bndries -> Zip Gaps might help closing those gaps. yellow for wireframe or surface boundary without connecting surface (might indicate bad areas). The color of the model in wireframe display indicates its type (with Utilities -> Environment -> Colors turned off):. In Creo Parametric a similar functionality can be found in File -> Prepare -> ModelCheck Geometry Check Highlighted menu option Info -> Geom/Check gives hints about geometric problems of the imported model. Shaded view is helpful for a first impression of the model quality. Part mode allows import with user defined accuracies, in assembly mode all solids/surface can be individually handled. Depending on the further usage, hybrid models and multi solids can be imported in part or assembly mode. If the STEP file contains assembly data, see to it that it is imported as an assembly (otherwise, Pro/ENGINEER gives a warning). In Wildfire 4 and higher choose File -> Open and select STEP as type. Up to Wildfire 3 import model with menu option File -> Import -> Append to model. Change to desired accuracy (File -> Prepare -> Model Properties ->. To import a part in Creo Parametric with an accuracy other than the default accuracy, the following procedure is recommended:. Change to desired accuracy ( Edit -> Set Up -> Accuracy ->. To import a part (does not work with assemblies) in Pro/ENGINEER 2000i² and Pro/ENGINEER Wildfire with an accuracy other than the default accuracy, the following procedure is recommended:. 
If the part is not imported correctly, try again by changing the accuracy to 0.02mm and 0.05mm.
A recommended setting of the absolute accuracy is 0.01mm. The parameter enable_absolute_accuracy in the config.pro needs to be set to yes if absolute accuracy is needed. Import model with menu option Insert -> Data from File. Change to desired accuracy ( Set Up -> Accuracy ->. To import a part (does not work with assemblies) in Pro/ENGINEER 2001 with an accuracy other than the default accuracy, the following procedure is recommended:. you can add the below mentioned settings in Pro/ENGINEER 2000i2. you can add the below mentioned settings in Pro/ENGINEER 2001. With File -> Options -> Configuration Editor you can add the below mentioned settings in Creo Elements. you can add the below mentioned settings in Pro/ENGINEER Wildfire. Some STEP specific settings can be added to the configuration file config.pro:. 
Pro/ENGINEER / Creo Elements - STEP Postprocessor
An adjustment of the STEP file is not necessary. Splitting a periodic face can improve the quality of the export but can affect performance. Split periodic faces: Splits periodic faces, such as cylindrical faces, into two. Clear this option to improve export performance. Export face/edge properties: Exports face and edge properties. Output coordinate system: by selecting default, no transformation matrix will be applied. 
#Creo elements pro wildfire 5.0 selection filter plus
Export sketch entities: export all the items in 3D curves, plus all 2D and 3D sketches in the document.3D curves: solid and surface bodies will be exported as wireframe entities and all 3D curves are also saved.Solid/Surface geometry: the geometry will be exported as solid and surface bodies.Under Output as the following options can be selected:.To export a STEP file choose File -> Save as., as file type choose STEP-Format (step, stp) and go to Options.The following settings are recommended up to SolidWorks 2016 and Pro/ENGINEER Wildfire 5.0 / Creo Parametric 3.0.
0 kommentar(er)
